TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 549 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1425 2-1425 2-1425 2-1425 2-1425 WARNING Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. STATION SELECTOR SWITCH VOLTAGE TEST (1) Set multimeter to volts dc. (2) Connect positive (+) probe of multimeter to wrecker control panel terminal board position 9. (3) Connect negative (-) probe of multimeter to wrecker control panel terminal board position C. (4) Position master power switch to on (TM 9-2320-366-10-1) and note reading on multimeter. (5) If 24 vdc is not present, go to step 6 of this fault. (6) Position master power switch to off (TM 9-2320-366-10-1).