TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 534 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1410 2-1410 2-1410 2-1410 2-1410 START 1. 2. NO YES NO YES YES Is continuity present from boom up lockout solenoid cable connector socket 2 to ground? Continuity Test or STE/ICE-R #91 Boom up lockout will not operate if continuity is not present at boom up lockout solenoid cable connector socket 1. KNOWN INFO Battery voltage OK. Input voltage to overload shutdown system OK. Hydraulic system shutdown solenoid OK. Hydraulic system shutdown relay OK. Crane functions OK. Overload lockout cable OK. Overload shutdown box OK. Tension load cell OK. Proximity sensor OK. Faulty boom up lockout solenoid cable. Faulty solenoid valve. POSSIBLE PROBLEMS TEST OPTIONS REASON FOR QUESTION Battery voltage OK. Input voltage to overload shutdown system OK. Hydraulic system shutdown solenoid OK. Hydraulic system shutdown relay OK. Crane functions OK. Overload lockout cable OK. Overload shutdown box OK. Tension load cell OK. Proximity sensor OK. Continuity to boom up lockout solenoid OK. Faulty boom up lockout solenoid cable. Faulty solenoid valve. Continuity Test or STE/ICE-R #91 Boom up lockout will not operate if continuity is not present from boom up lockout solenoid cable connector socket 2 to ground. KNOWN INFO POSSIBLE PROBLEMS TEST OPTIONS REASON FOR QUESTION Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Multimeter, Digital (Item 22, Appendix C) STE/ICE-R (Item 41, Appendix C) Is continuity present from boom up lockout solenoid cable connector socket 1 to terminal board position 19? e132. M1089 MATERIAL HANDLING CRANE (MHC) BOOM UP LOCKOUT DOES NOT ACTIVATE INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). References TM 9-4910-571-12&P Replace boom up lockout solenoid cable (para 7-107). Replace boom up lockout solenoid cable (para 7-107).