TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 52 of 1632
TEST OPTIONS REASON FOR QUESTION YES NO KNOWN INFO Replace manifold valve assembly (para 12-7). KNOWN INFO TEST OPTIONS REASON FOR QUESTION YES Replace manifold valve assembly (para 12-7). NO Resistance Test or STE/ICE-R Test #91 Resistance Test or STE/ICE-R Test #91 10. 11. TM 9-2320-366-20-2 2-958 Change 2 VOLTS gage registers in green zone with engine running. Circuit breaker CB40 OK. FRONT BRAKE AIR and REAR BRAKE AIR pressure gages read normal. Air pressure switch OK. Start and charging cable assembly OK. WTEC II / WTEC III dashboard cable assembly OK. Faulty air pressure transducer. Faulty manifold valve assembly. Faulty CTIS ECU. Faulty CTIS cable assembly. POSSIBLE PROBLEMS VOLTS gage registers in green zone with engine running. Circuit breaker CB40 OK. FRONT BRAKE AIR and REAR BRAKE AIR pressure gages read normal. Air pressure switch OK. Start and charging cable assembly OK. WTEC II / WTEC III dashboard cable assembly OK. Faulty air pressure transducer. Faulty manifold valve assembly. Faulty CTIS ECU. Faulty CTIS cable assembly. POSSIBLE PROBLEMS Is 30-80 ohms resistance present from pneumatic controller connector pin D to pin B? If 30-80 ohms resistance is not present, manifold valve assembly is faulty. If 30-80 ohms resistance is not present, manifold valve assembly is faulty. Is 30-80 ohms resistance present from pneumatic controller connector pin F to pin A? e85. CENTRAL TIRE INFLATION SYSTEM (CTIS) DOES NOT OPERATE (CONT)