TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 507 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1383 2-1383 2-1383 2-1383 2-1383 CONTINUITY TEST NOTE Step (6) requires the aid of an assistant. (6) Position SWING CW/CCW controller to CW and note reading on multimeter. (7) If continuity is not present, go to step 4 of this fault. (8) If continuity is present, go to step 5 of this fault. (9) Position remote control box switch to OFF. (1) Disconnect external remote control cable from remote control box. (2) Position remote control box switch to ON. (3) Set multimeter to ohms. (4) Connect positive (+) probe of multimeter on pin L of connector on remote control box. (5) Connect negative (-) probe of multimeter on pin H of connector on remote control box.