TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 46 of 1632
TEST OPTIONS YES NO KNOWN INFO TEST OPTIONS REASON FOR QUESTION YES NO Continuity Test or STE/ICE-R Test #91 Continuity Test or STE/ICE-R Test #91 4. KNOWN INFO 5. TM 9-2320-366-20-2 2-952 Change 2 Replace CTIS cable assembly (para 7-60). Replace CTIS cable assembly (para 7-60). POSSIBLE PROBLEMS REASON FOR QUESTION If continuity is not present, CTIS cable assembly is faulty. VOLTS gage registers in green zone with engine running. Circuit breaker CB40 OK. FRONT BRAKE AIR and REAR BRAKE AIR pressure gages read normal. Air pressure switch OK. Start and charging cable assembly OK. WTEC II / WTEC III dashboard cable assembly OK. POSSIBLE PROBLEMS Faulty air pressure transducer. Faulty manifold valve assembly. Faulty CTIS ECU. Faulty CTIS cable assembly. VOLTS gage registers in green zone with engine running. Circuit breaker CB40 OK. FRONT BRAKE AIR and REAR BRAKE AIR pressure gages read normal. Air pressure switch OK. Start and charging cable assembly OK. WTEC II / WTEC III dashboard cable assembly OK. Faulty air pressure transducer. Faulty manifold valve assembly. Faulty CTIS ECU. Faulty CTIS cable assembly. e85. CENTRAL TIRE INFLATION SYSTEM (CTIS) DOES NOT OPERATE (CONT) Is continuity present from connector P111 pin A to connector P112 socket A? If continuity is not present, CTIS cable assembly is faulty. Is continuity present from connector P111 pin A to connector P112 socket B?