TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 429 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1305 2-1305 2-1305 2-1305 2-1305 CONTINUITY TEST (1) Remove cover from crane remote control box connector. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter on pin J of crane remote control box connector. (4) Connect negative (-) probe of multimeter on pin H of crane remote control box connector and note reading on multimeter. (5) If continuity is not present, replace ON/OFF switch (para 7-32). (6) If continuity is present, repair crane remote control box internal wiring harness (para 7-32). (7) Install cover on crane remote control box connector.