TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 425 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1301 2-1301 2-1301 2-1301 2-1301 WARNING Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. VOLTAGE TEST (1) Remove cover from left or right remote control cable bulkhead connector. (2) Set multimeter to volts dc. (3) Connect positive (+) probe of multimeter to pin E of remote control bulkhead connector. (4) Connect negative (-) probe of multimeter to pin B of remote control bulkhead connector. (5) Position MAIN POWER switch to ON (TM 9-2320-366-10-1) and note reading on multimeter. (6) If 24 vdc is not present, relace left or right remote control cable (para 7-115 or 7-118).