TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 405 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1281 2-1281 2-1281 2-1281 2-1281 CONTINUITY TEST CONTINUITY TEST (1) Loosen four screws on junction box. (2) Open cover on junction box. (3) Disconnect boom down lockout solenoid cable connector from boom down lockout solenoid valve. (4) Set multimeter to ohms. (5) Connect positive (+) probe of multimeter in socket 1 of boom down lockout solenoid cable. (6) Connect negative (-) probe of multimeter to terminal board position 28 and note reading on multimeter. (7) If continuity is not present, replace boom down lockout solenoid cable (para 7-85). (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter in socket 2 of boom down lockout solenoid cable connector. (3) Connect negative (-) probe of multimeter on ground in junction box and note reading on multimeter. (4) If continuity is not present, replace boom down lockout solenoid cable (para 7-85). (5) Connect boom down lockout solenoid cable connector to boom down lockout solenoid valve. (6) Close cover on junction box. (7) Tighten four screws on junction box cover.