TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 40 of 1632
Perform Electrical System Troubleshooting e1. Circuit Breaker Does Not Operate on circuit breaker CB40 prior to beginning this task. NOTE NO REASON FOR QUESTION TEST OPTIONS Continuity Test or STE/ICE-R Test #91 1. POSSIBLE PROBLEMS KNOWN INFO YES CAUTION Read CAUTION on following page. Go to step 21 of this fault. e85. CENTRAL TIRE INFLATION SYSTEM (CTIS) DOES NOT OPERATE TM 9-2320-366-20-2 INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) STE/ICE-R (Item 41, Appendix C) Multimeter, Digital (Item 22, Appendix C) Materials/Parts Wire, Elect, 50 ft (Item 71, Appendix D) Personnel Required (2) References TM 9-4910-571-12&P START Is continuity present from connector P110 socket T? This question eliminates possible problems and determines where troubleshooting continues. 2-946 Change 2 VOLTS gage registers in green zone with engine running. Circuit breaker CB40 OK. FRONT BRAKE AIR and REAR BRAKE AIR pressure gages read normal. Faulty air pressure switch. Faulty air pressure transducer. Faulty manifold valve assembly. Faulty CTIS ECU. Faulty start and charging cable assembly. Faulty WTEC II / WTEC III dashboard cable assembly. Faulty CTIS cable assembly.