TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 359 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1235 2-1235 2-1235 2-1235 2-1235 CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter on pin D of remote control cable connector. (3) Connect negative (-) probe of multimeter on terminal board lower position 20 and note reading on multimeter. (4) If continuity is not present, replace remote control cable (para 7-96). (5) If continuity is present, notify DS Maintenance. (6) Close cover on junction box. (7) Tighten four screws on junction box cover. (8) Stow crane (TM 9-2320-366-10-1).