TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 341 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1217 2-1217 2-1217 2-1217 2-1217 NOTE Step (5) requires the aid of an assistant. CONTINUITY TEST (5) Position BOOM UP/DOWN controller to DOWN and note reading on multimeter. (6) If continuity is not present, go to step 4 of this fault. (7) If continuity is present, go to step 5 of this fault. (1) Disconnect external remote control cable from remote control box. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter on pin M of connector on remote control box. (4) Connect negative (-) probe of multimeter on pin H of connector on remote control box.