TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 306 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1182 2-1182 2-1182 2-1182 2-1182 KNOWN INFO TEST OPTIONS Continuity Test or STE/ICE Test #91 REASON FOR QUESTION Other crane functions from remote station OK. Hoist up solenoid cable OK. Hoist up solenoid OK. External remote control cable OK. Remote control cable OK. POSSIBLE PROBLEMS Faulty remote control box internal wiring harness. Faulty hoist up/down controller. 4. If continuity is not present, remote control box internal wiring harness is faulty. If continuity is present, HOIST UP/DOWN controller is faulty. Is continuity present from remote control box connector pin F to HOIST UP/DOWN controller internal wiring harness pin 3 and remote control box connector pin H to HOIST UP/DOWN controller internal wiring harness pin 1? YES NO Repair remote control box internal wiring harness (para 7-32). Replace HOIST UP/DOWN controller (para 7-32). e106. M1084/M1086 MATERIAL HANDLING CRANE (MHC) HOIST UP DOES NOT OPERATE FROM REMOTE e106. M1084/M1086 MATERIAL HANDLING CRANE (MHC) HOIST UP DOES NOT OPERATE FROM REMOTE e106. M1084/M1086 MATERIAL HANDLING CRANE (MHC) HOIST UP DOES NOT OPERATE FROM REMOTE e106. M1084/M1086 MATERIAL HANDLING CRANE (MHC) HOIST UP DOES NOT OPERATE FROM REMOTE e106. M1084/M1086 MATERIAL HANDLING CRANE (MHC) HOIST UP DOES NOT OPERATE FROM REMOTE STATION (CONT) STATION (CONT) STATION (CONT) STATION (CONT) STATION (CONT)