TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 305 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1181 2-1181 2-1181 2-1181 2-1181 NOTE Step (5) requires the aid of an assistant. (5) Position HOIST UP/DOWN controller to UP and note reading on multimeter. (6) If continuity is not present, go to step 4 of this fault. (7) If continuity is present, go to step 5 of this fault. CONTINUITY TEST (1) Disconnect external remote control cable from remote control box. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter on pin F of connector on remote control box. (4) Connect negative (-) probe of multimeter on pin H of connector on remote control box.