TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 296 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1172 2-1172 2-1172 2-1172 2-1172 YES KNOWN INFO TEST OPTIONS Continuity Test or STE/ICE Test #91 REASON FOR QUESTION If continuity is not present, external remote control cable is faulty. Faulty external remote control cable. Faulty remote control box ON/OFF switch. Battery voltage OK. Main power circuit breaker switch OK. Input connector OK. Crane power cable OK. Reverse polarity diodes OK. Control lockout relay OK. Left outrigger proximity sensing switch cable assembly OK. Right outrigger proximity sensing switch cable assembly OK. Junction box internal wiring OK. Overload shutdown system OK. Hydraulic system shutdown relay OK. Remote control cable OK. POSSIBLE PROBLEMS 2. Is continuity present from one end of external remote control cable pin E to other end of external remote control cable pin E? NO Replace external remote control cable. e105. M1084/M1086 MATERIAL HANDLING CRANE (MHC) DOES NOT OPERATE FROM REMOTE CONTROL e105. M1084/M1086 MATERIAL HANDLING CRANE (MHC) DOES NOT OPERATE FROM REMOTE CONTROL e105. M1084/M1086 MATERIAL HANDLING CRANE (MHC) DOES NOT OPERATE FROM REMOTE CONTROL e105. M1084/M1086 MATERIAL HANDLING CRANE (MHC) DOES NOT OPERATE FROM REMOTE CONTROL e105. M1084/M1086 MATERIAL HANDLING CRANE (MHC) DOES NOT OPERATE FROM REMOTE CONTROL (CONT) (CONT) (CONT) (CONT) (CONT)