TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 295 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1171 2-1171 2-1171 2-1171 2-1171 CONTINUITY TEST (1) Loosen four screws on junction box cover. (2) Open cover on juntion box. (3) Disconnect remote control cable from remote control box. (4) Set multimeter to ohms. (5) Connect positive (+) probe of multimeter on pin E of connector on remote control cable. (6) Connect negative (-) probe on junction box terminal board position 25 and note reading on multimeter. (7) If continuity is not present, replace remote control cable (para 7-96). (8) Close cover on junction box. (9) Tighten four screws on junction box cover.