TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 291 of 1632
Change 2 2-1167 (1) Set multimeter to volts DC. (2) Connect positive (+) probe of multimeter on connector P171-C. (2) Connect negative (-) probe of multimeter on ground. (3) Position master power switch to on (TM 9-2320-366-10-1) and note reading on multimeter. (4) If 24 VDC is not present, repair wire 2069 (para 2-45) or replace crane power cable (para 7-90). (5) Position master power switch to off (TM 9-2320-366-10-1). VOLTAGE TEST TM 9-2320-366-20-2