TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 287 of 1632
VOLTAGE TEST WARNING Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuits and cause severe burns or electrical shock. Change 2 2-1163 (1) Loosen four screws on junction box cover. (2) Open cover on junction box. (3) Set multimeter to volts dc. (4) Connect positive (+) probe of multimeter on terminal board position 5. (5) Connect negative (-) probe of multimeter on ground quick-connect terminal block (above main power switch) and note reading on multimeter. (6) If 24 VDC is not present, go to step 2 of this fault. (7) If 24 VDC is present, perform Electrical System troubleshooting task e115. M1084/M1086 Material Handling Crane (MHC) Overload Shutdown System Stays Activated. TM 9-2320-366-20-2