TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 249 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1125 2-1125 2-1125 2-1125 2-1125 CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect jumper wire to connector J93-1. (3) Connect positive (+) probe of multimeter to connector P43-1. (4) Connect negative (-) probe of multimeter to jumper wire and note reading on multimeter. (5) If continuity is not present, repair wire 1403 (para 2-45) or replace engine control cable assembly (para 7-80). (6) If continuity is present, replace ether sensor (para 7-47). (7) Remove jumper wire from connector J93. (8) Connect connector J93 to ether valve connector. (9) Connect connector clamp to ether valve connector. (10) Connect connector J43 to connector P43. (11) Install instrument panel assembly (para 7-15).