TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 241 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1117 2-1117 2-1117 2-1117 2-1117 CONTINUITY TEST (1) Raise cab (TM 9-2320-366-10). (2) Disconnect connector P42 from ether sensor connector. (3) Connect jumper wire to connector P42-2. (4) Set multimeter to ohms. (5) Connect positive (+) probe of multimeter to connector P31-2. (6) Connect negative (-) probe of multimeter to jumper wire and note reading on multimeter. (7) If continuity is not present, repair wire 1402 (para 2-45) or replace engine control cable assembly (para 7-80).