TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 215 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1091 2-1091 2-1091 2-1091 2-1091 CONTINUITY TEST (1) Remove instrument panel assembly for access (para 7-15). (2) Disconnect connector PX33 from WTEC III TPSS. (3) Disconnect connector clamp from connector P116. (4) Disconnect connector P116 from WTEC III transmission ECU. (5) Set multimeter to ohms. (6) Connect positive (+) probe of multimeter to connector P116-32. (7) Connect negative (-) probe of multimeter to connector PX33-P and note reading on multimeter. (8) If continuity is not present, repair wire 143 (para 2-45) or replace WTEC III dashboard cable assembly (para 7-11). (9) Connect connector PX33 to WTEC III TPSS. (10) Install instrument panel assembly (para 7-15). (11) Connect connector P116 to WTEC III transmission ECU. (12) Connect connector clamp on connector P116.