TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 213 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1089 2-1089 2-1089 2-1089 2-1089 CONTINUITY TEST (1) Disconnect connector clamp from connector P115. (2) Disconnect connector P115 from WTEC III transmission ECU. (3) Set multimeter to ohms. (4) Connect positive (+) probe of multimeter to connector P115-18. (5) Connect negative (-) probe of multimeter to PDP, terminal 85, where WTEC III relay K34 was removed, and note reading on multimeter. (6) If continuity is not present, repair wire 125 (para 2-45) or replace WTEC III dashboard cable assembly (para 7-11). (7) Connect connector P115 to WTEC III transmission ECU. (8) Connect connector clamp on connector P115. (9) Install WTEC III relay K34 on PDP.