TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 207 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1083 2-1083 2-1083 2-1083 2-1083 VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. WARNING (1) Remove WTEC III relay K34 from PDP. (2) Set multimeter to volts dc. (3) Connect positive (+) probe of multimeter to PDP, terminal 30, where WTEC III relay K34 was removed. (4) Connect negative (-) probe of multimeter to ground. (5) Position master power switch to on (TM 9-2320-366-10-1) and note reading on multimeter. (6) If 24 vdc is not present, repair wire 1692 (para 2-45) or replace WTEC III dashboard cable assembly (para 7-11). (7) Position master power switch to off (TM 9-2320-366-10-1).