TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 187 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1063 2-1063 2-1063 2-1063 2-1063 CONTINUITY TEST (1) Remove three screws and washers from PDP. (2) Remove three screws from PDP. (3) Lift PDP outward to gain access. (4) Disconnect connector J7 from WTEC II TEPSS dimmer module. (5) Set multimeter to ohms. (6) Connect positive (+) probe of multimeter to connector J7-4. (7) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (8) If continuity is not present, repair wire 158 (para 2-45) or replace WTEC II dashboard cable assembly (para 7-10).