TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 163 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1049 2-1049 2-1049 2-1049 2-1049 Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. WARNING VOLTAGE TEST (1) Set multimeter to volts dc. (2) Connect positive (+) probe of multimeter to PDP, where WTEC III relay K37 terminal 86 was removed. (3) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (4) If 24 vdc is not present, replace WTEC III transmission ECU (para 8-7). (5) If 24 vdc is present, replace WTEC III relay K37 (para 7-9). (6) Install WTEC III relay K37 on PDP. (7) Remove PTO switch from connector P904. (8) Install personnel heater (para 18-9).