TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 161 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1047 2-1047 2-1047 2-1047 2-1047 CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect positve (+) probe of multimeter to connector P115-22. (3) Connect negative (-) probe of multimeter to PDP, where WTEC III relay K37 terminal 86 was removed, and note reading on multimeter. (4) If continuity is not present, repair wire 112 (para 2-45) or replace WTEC III dashboard cable assembly (para 7-11). (5) Connect connector P115 to WTEC III transmission ECU. (6) Connect connector clamp on connector P115.