TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 147 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1033 2-1033 2-1033 2-1033 2-1033 VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. WARNING (3) Set multimeter to volts dc. (4) Connect positive (+) probe of multimeter to connector J913-5. (5) Connect negative (-) probe of multimeter to ground. (6) Position master power switch to on (TM 9-2320-366-10-1) and note reading on multimeter. (7) If 24 vdc is not present, repair wire 1925 (para 2-45) or replace WTEC III dashboard cable assembly (para 7-11). (8) Position master power switch to off (TM 9-2320-366-10-1). (1) Remove personnel heater for access (para 18-9). (2) Disconnect connector J913 from connector P913.