TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 133 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1019 2-1019 2-1019 2-1019 2-1019 CONTINUITY TEST (1) Remove kick panel (para 16-3). (2) Disconnect connector P210 from connector J210. (3) Set multimeter to ohms. (4) Connect positive (+) probe of multimeter to connector P210-4. (5) Disconnect connector P217 from PTO. (6) Connect negative (-) probe of multimeter to connector P217-B and note reading on multimeter. (7) If continuity is not present, repair wire 2019 (para 2-45) or replace PTO cable assembly (para 7-127). (8) Connect connector P217 to PTO. (9) Connect connector P210 to connector J210.