TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 1320 of 1632
KNOWN INFO KNOWN INFO POSSIBLE PROBLEMS TM 9-2320-366-20-2 j5. AIR SYSTEM PRESSURE BUILDS UP MORE THAN 120 PSI (827 KPA) (COMPRESSOR FAILS TO UNLOAD) (CONT) 2-1980 Change 1 FRONT BRAKE/REAR BRAKE AIR pressure gage reads above 120 psi. Air hose from wet tank to air compressor governor OK. POSSIBLE PROBLEMS Blocked governor air hose. Faulty air compressor governor. Faulty purge valve. FRONT BRAKE/REAR BRAKE AIR pressure gage reads above 120 psi. Air hose from wet OK. Governor air hose OK. Faulty air compressor governor. Faulty purge valve. Service air dryer (para 23-11). Visual Inspection Visual Inspection REASON FOR QUESTION TEST OPTIONS 3. YES NO REASON FOR QUESTION TEST OPTIONS 2. Adjust or replace air compressor governor (para 11-31). YES Does air escape from air compressor to air dryer purge valve air hose? Air compressor will fail to unload if air compressor to purge valve air hose is blocked. Clear or replace air hose from air compressor to purge valve (para 23-2). Is air present from air compressor to purge valve? If air is not present from air compressor, air compressor governor is faulty. If air is present air dryer purge valve is faulty. NO