TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 1287 of 1632
TM 9-2320-366-20-2 Table 2-49.10. Inversion Valve Control Port Fitting Hose Numbers Model Hose (1) Loosen air hose (refer to Table 2-49.10. Inversion Valve Control Port Fitting Hose Numbers) at inversion valve control port 90-degree fitting supply port. (2) Start engine (TM 9-2320-366-10-1). (3) Apply service brakes (TM 9-2320-366-10-1). (4) Check for presence of air at air hose (refer to Table 2-49.10. Inversion Valve Control Port Fitting Hose Numbers). (5) Shut down engine (TM 9-2320-366-10-1). (6) If air is not present, replace air hose (refer to Table 2-49.10. Inversion Valve Control Port Fitting Hose Numbers) (para 11-21). (7) If air is present, replace inversion valve control port 90-degree fitting (para 11-13). (8) Tighten air hose (refer to Table 2-49.10. Inversion Valve Control Port Fitting Hose Numbers) at inversion valve control port 90-degree fitting supply port. All Except M1086 and M1089 M1086 M1089 130 132 128 Change 1 2-1976.35