TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 125 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1011 2-1011 2-1011 2-1011 2-1011 VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. WARNING (1) Disconnect connector P217 from PTO. (2) Set multimeter to volts dc. (3) Connect positive (+) probe of multimeter to connector P217-B. (4) Connect negative (-) probe of multimeter to ground. (5) Start engine (TM 9-2320-366-10-1). (6) Position PTO switch to on (TM 9-2320-366-10-1) and note reading on multimeter. (7) If 24 vdc is not present, go to step 3 of this fault. (8) Position PTO switch to off (TM 9-2320-366-10-1). (9) Shut down engine (TM 9-2320-366-10-1).