TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 124 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1010 2-1010 2-1010 2-1010 2-1010 1. START YES NO KNOWN INFO POSSIBLE PROBLEMS WARNING Read WARNING on following page. Go to step 3 of this fault. TEST OPTIONS Voltage Test or STE/ICE-R #89 REASON FOR QUESTION Circuit breaker OK. Vehicle starts. Is 24 vdc present at connector P217-B? INITIAL SETUP Equipment Condition Engine shut down (TM 9-2320-366-10-1). Personnel Required (2) References TM 9-4910-571-12&P This question helps eliminate possible problems and determines where troubleshooting continues. Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) STE/ICE-R (Item 41, Appendix C) Multimeter, Digital (Item 22, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Materials/Parts Wire, Elect, 50 ft (Item 71, Appendix D) Wire, Relay Test (Item E-9, Appendix E) Faulty PTO cable assembly. Faulty PTO. Faulty dashboard cable assembly. Faulty auxiliary panel cable assembly. Faulty PTO switch. Faulty WTEC II VIM. Faulty WTEC II relay SF02. Faulty WTEC III relay K37. Faulty WTEC III transmission ECU. e91. POWER TAKE-OFF (PTO) DOES NOT OPERATE