TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 1215 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1941 2-1941 2-1941 2-1941 2-1941 WARNING Spring brake chambers are very powerful. Cage spring brakes before removing chambers. Failure to comply may result in injury to personnel. (1) Disconnect and tag air lines to spring brake chambers at wheel. (2) Cage spring brakes on rear wheels (para 11-6). (3) Unscrew brake chamber(s) from hub and remove wedge assembly from wheel (para 11-5). (4) Inspect wedge spring for damage. (5) Inspect rollers for flattening or damage. (6) Manually check operation of wedge assembly in plunger chamber. (7) Install wedge assembly and brake chambers (para 11-5). (8) Install wheel brake components and adjust brakes (para 11-3). (1) Install wheels (TM 9-2320-366-10-1). (2) Rotate affected wheel and listen for loose or damaged wheel bearings. If wheel makes grinding sound during rotation, adjust or replace wheel bearings (para 10-2). (3) Grasp wheel on opposite sides, top and bottom, and pull in and out. If wheel has excessive play on the axle, adjust or replace wheel bearings (para 10-2). (4) If wheel bearings are good, replace brake chamber(s) (para 11-8). (5) Check wheel hub oil level (Appendix H). If oil level is low, replace wheel bearings (para 10-2). (6) Set parking brake (TM 9-2320-366-10-1). (7) Remove trestle stands and lower wheels to ground.