TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 1209 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-1935 2-1935 2-1935 2-1935 2-1935 WARNING Overheated brakes can cause severe burns. Perform task only when brakes have cooled. Failure to comply may result in injury to personnel. Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. NOTE If wheel drums are too hot for hand touch after road test of vehicle, brakes are overheated. (1) Release parking brake (TM 9-2320-366-10-1). (2) Check for presence of air at air hose to spring brake chamber. If air is present at spring brake chamber, replace fittings or air hose (para 11-21). (3) Remove cover plug from caging hole at back of spring brake chamber (TM 9-2320-366-10-2). (4) With flashlight directed at caging hole, apply and release parking brake. Check if spring retracts when air is supplied by releasing parking brake. If brake does not cage (retract) when air is supplied to spring brake chamber, replace spring brake chamber (para 11-8). (5) Replace plug in caging hole of spring brake chamber (TM 9-2320-366-10-2). (6) Apply parking brake (TM 9-2320-366-10-1).