TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 1191 of 1632
(1) Disconnect vent hose at front brake air chamber. (2) Blow compressed air through vent hose. (3) Check for air escaping at vent. (4) Attach vent hose at front brake air chamber. (5) Raise front axle off maintenance trestles. (6) Remove maintenance trestles and lower front wheels to ground. TM 9-2320-366-20-2 Change 1 2-1917 (1) If rear brakes locked up before front brakes on road test of unloaded vehicle, check load sensing valve hardware, arm position, adjusting clamp, and cable. (2) If valve arm is in full up position (valve spring rest position), adjust or replace load sensing valve (para 11-10).