TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 1184 of 1632
i5. VEHICLE BRAKES UNEVENLY, BRAKES PULL TO ONE SIDE OR GRAB Personnel Required (2) START Does vehicle pull to left or right when brakes are applied? 1. Go to step 7 of this fault. YES NO TEST OPTIONS Visual inspection REASON FOR QUESTION Failure or binding of front brakes on one side of vehicle will cause vehicle to pull to one side. KNOWN INFO Air tanks pressurized. POSSIBLE PROBLEMS Contaminated front wheel brake shoes. Faulty front wheel brake adjustment. Faulty front axle quick release valve. Faulty air hose to front brake air chamber. Faulty front brake vent hose. Faulty front brake air chamber. Faulty load sensing valve. Contaminated rear brake shoes. Faulty rear wheel brake adjustment. Faulty relay valve. Faulty air hose to rear brake air chamber. Faulty rear brake vent hose or vent valve. Faulty rear brake air chamber(s). TM 9-2320-366-20-2 2-1910 Change 1 INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Trestle, Motor Vehicle Maintenance (2) (Item 47, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)