TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 1163 of 1632
Change 1 2-1887 (1) Tighten air hose 103 at cab floor fitting. (2) Push SYSTEM PARK and TRAILER AIR SUPPLY valves back into personnel heater. (3) Install dash plate over valve stems with six screws. (4) Install nuts on knob stems. (5) Install SYSTEM PARK and TRAILER AIR SUPPLY knobs on stems with roll pins. (6) Raise cab (TM 9-2320-366-10-1). (7) Loosen air hose 109 at supply port of two-way check valve. (8) Check for presence of air at air hose 109. (9) If no air is present, replace air hose 109 (para 11-21). TM 9-2320-366-20-2