TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 112 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-998 2-998 2-998 2-998 2-998 1. START YES NO This question eliminates possible problems and determines where troubleshooting continues. KNOWN INFO WARNING Read WARNING on following page. Go to step 3 of this fault. TEST OPTIONS Voltage Test or STE/ICE-R #89 REASON FOR QUESTION Is 24 vdc present on winch out solenoid L5 connector terminal 1? INITIAL SETUP Equipment Condition Engine shut down (TM 9-2320-366-10-1). Personnel Required (2) References TM 9-4910-571-12&P Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) STE/ICE-R (Item 41, Appendix C) Multimeter, Digital (Item 22, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Materials/Parts Wire, Elect, 50 ft (Item 67, Appendix D) e90. 15K SELF-RECOVERY WINCH (SRW) DOES NOT PAY OUT Circuit breaker OK. 15K SRW reels in OK. POSSIBLE PROBLEMS Faulty winch control valve cable assembly. Faulty winch control valve assembly. Faulty WINCH IN/OUT switch. Faulty PTO cable assembly. Faulty auxiliary panel cable assembly.