TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 1095 of 1632
CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to terminal board TB1 position 60. (3) Connect negative (-) probe of multimeter to terminal board TB1 position 62 and note reading on multimeter. (4) If continuity is not present, replace terminal board TB1 (para 7-11). (5) If continuity is present, Repair wire 1690 from terminal board TB1 position 62 to circuit breaker CB79 (para 2-45) or replace WTEC II dashboard cable assembly (para 7-11). (6) Install PDP on dashboard with three screws. (7) Install three washers and screws in PDP. (8) Install PDP cover (para 16-2). (9) Connect batteries (para 7-57). TM 9-2320-366-20-2 Change 1 2-1822.27