TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 109 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-995 2-995 2-995 2-995 2-995 CONTINUITY TEST (1) Disconnect connector P215 from connector J215. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to connector J210-14. (4) Connect negative (-) probe of multimeter to connector P215-2 and note reading on multimeter. (5) If continuity is not present, repair wire 2005 (para 2-45) or replace PTO cable assembly (para 7-127). (6) Connect connector P210 to connector J210. (7) Install kick panel (para 16-3).