TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 1080 of 1632
WARNING CAUTION Read WARNING and CAUTION on following page. 1. KNOWN INFO TEST OPTIONS Voltage Test or STE/ICE-R Test #89 REASON FOR QUESTION NO YES START NOTE POSSIBLE PROBLEMS Perform Electrical System Troubleshooting e1. CIRCUIT BREAKER DOES NOT OPERATE on circuit breakers CB43 and CB79 prior to beginning this task. 12 VDC and 24 VDC circuits operate. Circuit breaker CB43 OK. Circuit breaker CB79 OK. Is 24 VDC present at connector P115 socket 16? If 24 VDC is not present, WTEC III dashboard cable assembly is faulty. Repair wire 136 from connector P115 sockets 16 to circuit breaker CB43 (para 2-45) or replace WTEC III dashboard cable assembly (para 7-11). Faulty WTEC III dashboard cable assembly. Faulty terminal board TB1. Faulty WTEC III ECU. Faulty WTEC III TPSS. TM 9-2320-366-20-2 f40. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DOES NOT ILLUMINATE INITAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Kick panel removed (para 16-3). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) STE/ICE-R (Item 41, Appendix C) Multimeter, Digital (Item 22, Appendix C) Personnel Required (2) References TM 9-4910-571-12&P 2-1822.12 Change 1