TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 107 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-993 2-993 2-993 2-993 2-993 CONTINUITY TEST (1) Remove kick panel (para 16-3). (2) Disconnect connector P210 from connector J210. (3) Set multimeter to ohms. (4) Connect positive (+) probe of multimeter to connector P903-1. (5) Connect negative (-) probe of multimeter to connector P210-14 and note reading on multimeter. (6) If continuity is not present, repair wire 2005 (para 2-45) or replace auxiliary panel cable assembly (para 7-58). (7) Connect connector P903 to WINCH IN/OUT switch. (8) Position auxiliary panel on auxiliary panel housing with six screws. (9) Tighten six screws to 24 lb-in. (3 N·m).