TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 1069 of 1632
Change 1 2-1822.1 TM 9-2320-366-20-2 CAUTION (1) Perform WTEC III Code Reading and Code Clearing (para 8-5). (2) If diagnostic code 23 is not logged after clearing, fault is corrected. (3) If diagnostic code 23 is logged after clearing, further troubleshooting is required. Loose or dirty connectors may cause intermittent loss of power to transmission ECU and diagnostic codes to be logged. Ensure that all connectors are clean and tight before performing troubleshooting. Failure to comply may result in incorrect test results.