Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download

Page 1057 of 1632

(1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to connector P115-17. (3) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (4) Connect positive (+) probe of multimeter to connector P115-32. (5) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (6) If resistance noted in step 3 or step 5 is higher than 0.5 ohms, repair wire 143 (para 2-45) or replace WTEC III dashboard cable assembly (para 7-11). (7) Connect connector P115 to WTEC III transmission ECU. (8) Connect connector clamp on connector P115. RESISTANCE TEST Change 1 2-1811 TM 9-2320-366-20-2