Sign up to sell your inventory with NSN Lookup

TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download

Page 1053 of 1632

Change 1 2-1807 TM 9-2320-366-20-2 Use care when testing electrical connectors. Do not damage connector pins or sockets with multimeter probes. Failure to comply may result in damage to equipment. Loose or dirty connectors may cause intermittent loss of power to transmission ECU and diagnostic codes to be logged. Ensure that all connectors are clean and tight before performing troubleshooting. Failure to comply may result in incorrect test results. CAUTION (1) Check to see if main code 13 sub code 12 is active in WTEC III TPSS (para 8-5). (2) If main code 13 sub code 12 is not active in WTEC III TPSS, go to step 7 of this fault. Inspect connector pins/sockets for damage, corrosion, and serviceability. Check that connector pins are not pushed back and are capable of making good contact. NOTE