TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 1046 of 1632
TM 9-2320-366-20-2 2-1800 Change 1 f36. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE 56 AND ANY SUB CODE INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) STE/ICE-R (Item 41, Appendix C) Pan, Drain (Item 24, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Wrench Set, Socket (Item 51, Appendix C) 1. Is main code 56 logged without main code 22 sub code15 or 16? CAUTION Read CAUTION on following page. START TEST OPTIONS Visual Inspection REASON FOR QUESTION If main code 22 sub code 15 or 16 is logged, turbine speed sensor, output speed sensor, or associated circuit(s) is faulty. KNOWN INFO Transmission oil level OK. Fuse OK. Batteries OK. POSSIBLE PROBLEMS Faulty output speed sensor. Faulty turbine speed sensor. Faulty WTEC III transmission ECU. YES NO Perform Transmission System Troubleshooting (f23. WTEC III Transmission Pushbutton Shift Selector (TPSS) Displays Main Code 22 Sub Code 15 or f24. WTEC III Transmission Pushbutton Shift Selector (TPSS) Displays Main Code 22 Sub Code 16). Materials/Parts Packing, Preformed (Item 197, Appendix G) Adapter, Straight, Pipe to Tube (Item 1.2, Appendix D) Adapter, Straight, Tube to Boss (Item 1.3, Appendix D) Hose Assembly, Nonmetallic (Item 24.13, Appendix D) Personnel Required (2) References TM 9-4910-571-12&P