TM-9-2320-366-20-2 MTV Unit Maintenance Manual M1083 Series - Volume 2 Download
Page 103 of 1632
TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 TM 9-2320-366-20-2 2-989 2-989 2-989 2-989 2-989 CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to winch in solenoid L4 terminal 2. (3) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (4) If continuity is not present, repair wire 3069 (para 2-45) or replace winch control valve cable assembly (para 7-135). (5) If continuity is present, replace winch control valve assembly (para 17-25). (6) Connect winch in solenoid L4 connector on solenoid L4 and tighten screw.