TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 995 of 1824
TM 9-2320-366-20-1 Change 1 2-604.63 VOLTAGE TEST WARNING (1) Set multimeter to volts DC. (2) Connect positive (+) probe of multimeter to relay K20 terminal 86 on PDP. (3) Connect negative (-) probe of multimeter to ground. (4) Position main light switch to SER DRIVE (TM 9-2320-366-10-1) and note reading on multimeter. (5) If 12 VDC is not present, go to step 6 of this fault. (6) Position main light switch to OFF (TM 9-2320-366-10-1). Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuits and cause severe burns or electrical shock.