TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 971 of 1824
CONTINUITY TEST Change 1 2-604.39 TM 9-2320-366-20-1 (1) Remove two screws and lens cover from RH side marker light base. (2) Remove RH side marker light lamp from socket. (3) Set multimeter to ohms. (4) Check continuity through RH side marker light lamp and note reading on multimeter. (5) If continuity is not present, replace RH side marker light lamp (para 7-38) and go to step 7 of this fault if required. (6) Install RH side marker light lamp in socket. (7) Install lens cover on RH side marker light base with two screws.