Sign up to sell your inventory with NSN Lookup

TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download

Page 961 of 1824

CONTINUITY TEST Change 1 2-604.29 TM 9-2320-366-20-1 (1) Remove nut, lockwasher, terminal lug TL16 and lockwasher from LH rear marker light screw. Discard lockwashers. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to terminal lug TL16. (4) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (5) If continuity is not present, repair wire 3094 from terminal lug TL16 to ground (para 2-45) and go to step 5 of this fault or replace rear lights cable assembly (para 7-84) and go to step 1 of this fault. (6) If continuity is present, repair wire 489 from splice E15 to splice E16 (para 2-45) and go to step 5 of this fault if required or replace rear lights cable assembly (para 7-84) and go to step 1 of this fault. (7) Install lockwasher, terminal lug TL16, lockwasher, and nut on LH rear marker light screw.