TM-9-2320-366-20-1 MTV Unit Maintenance Manual M1083 Series - Volume 1 Download
Page 877 of 1824
Change 1 2-572.1 TM 9-2320-366-20-1 CONTINUITY TEST (1) Remove two screws and lens cover from RH cab marker light base. (2) Remove RH marker light lamp from socket. (3) Set multimeter to ohms. (4) Check continuity through RH marker light lamp and note reading on multimeter. (5) If continuity is not present, replace RH marker light lamp (para 7-38). (1) Position main light switch to SER DRIVE (TM 9-2320-366-10-1). (2) If RH door marker light lamp does not illuminate, go to step 4 of this fault. (3) Position main light switch to OFF (TM 9-2320-366-10-1).